Home
Videos uploaded by user “LEI ZHANG”
KCM--Leizhang112@126.com---Fridge Door Foaming Line with 20 Jigs Moving in Linear
 
01:34
[email protected] Door Foaming Line with 20 Jigs Moving in Linear and Capable for Cyclopentane I. Summary: The door foaming line is a 20-stations linear moving device with two layers of upper and lower that used for the foaming of refrigerator door. The heating oven is for solidify foaming agent in the two sides and within the lower layer. This foaming line contains the following working stations: manually feeding material, auto injection, closing molding cover, positioning and locking tightly with jig's cover, circling moving and solidify foaming agent, unlocking tightening device, opening molding cover, automatically unfeeding foamed products etc. There are following major parts to form whole line such as motor driving system, mechanical device for auto injection, foaming mould frame(jig or foaming fixtures), locking(unlocking) device, closing and opening device for molding cover, safety and protection frame(including inclining device in the position of feeding area, steam heating system, platform for positioning high pressure foaming machine, heating oven for solidify foaming agent(including the steaming heating platform and foaming jigs maintenance lifting device 2 sets), exhausting system around the injection zone, equipotential system for connecting with ground level, unloading mechanical robot and electrical control system; In the middle and upper layer, there are some vacant positions for operation like feeding and unfeeding, injection and closing and opening stations etc. This line has advantage of safety and reliability, compact structure, small area occupation and high efficiency etc; Meanwhile there is a special device for cyclopentane density inspection( the inspection sensor and apparatus will be prepared by the buyer, the seller will in charge of connection with safety interface of wet parts), siren system only in the drying parts, exhausting system to guarantee the safety of cyclopentane foaming agent; in addition, in the position of feeding material, the inclining device can realize molding frame has an inclining angle with 70 degree that will suitable for operators handle here and also convenient for loading and unloading during the procedure of operation. II. Main technical performance parameter  Station number of the lines: 20  Molding board size (L×W) 2000×1000×180mm  Heating mode steam heating  Foaming material: Non-freon foaming  Tact time(depending on proficiency in operation): 40s  Solidifying time for foaming agent 360s---adjustable within 999s;  Air source pressure: 0.6Mpa  Electricity power supply: 380V\50Hz  Size(L×W×H): 30000×7000×4000mm-------reference only, final parameter will depending on the layout from your product's size demands KCM MACHINERY MANUFACTURING CO., LTD Mr. Leo Zhang Mobile Phone: +0086 15855019595 Email: [email protected]; [email protected]; [email protected]; Tel: 0086 550 3088037; Fax: 0086-550 3088029 SKYPE: leizhang112; QQ: 454656098; Http: www.e-kc.net Address: No. 688, ZIWEI South Road, CHUZHOU City, Anhui Province, China. KEY WORDS: Refrigerator Door Foaming Plant, Flat Moving Door Foaming Line, Flat Rotary Foaming Jig Line, Fridge Door Foaming Drum, Door Foaming Drum, Door PU Foaming, Door Body Foaming, Refrigerator Door PU Foaming Machine, Refrigerator Foaming Line, Refrigerator Foaming Machine, Freezer Door Foaming Drum, Freezer Door PU Foaming,
Views: 3690 LEI ZHANG
Leizhang112@126.com-----Refrigerator Door  Body Foaming Plant by Horizontal Moving Foaming Jigs
 
01:13
[email protected] Door Foaming Line with 20 Jigs Moving in Linear and Capable for Cyclopentane I. Summary: The door foaming line is a 20-stations linear moving device with two layers of upper and lower that used for the foaming of refrigerator door. The heating oven is for solidify foaming agent in the two sides and within the lower layer. This foaming line contains the following working stations: manually feeding material, auto injection, closing molding cover, positioning and locking tightly with jig's cover, circling moving and solidify foaming agent, unlocking tightening device, opening molding cover, automatically unfeeding foamed products etc. There are following major parts to form whole line such as motor driving system, mechanical device for auto injection, foaming mould frame(jig or foaming fixtures), locking(unlocking) device, closing and opening device for molding cover, safety and protection frame(including inclining device in the position of feeding area, steam heating system, platform for positioning high pressure foaming machine, heating oven for solidify foaming agent(including the steaming heating platform and foaming jigs maintenance lifting device 2 sets), exhausting system around the injection zone, equipotential system for connecting with ground level, unloading mechanical robot and electrical control system; In the middle and upper layer, there are some vacant positions for operation like feeding and unfeeding, injection and closing and opening stations etc. This line has advantage of safety and reliability, compact structure, small area occupation and high efficiency etc; Meanwhile there is a special device for cyclopentane density inspection( the inspection sensor and apparatus will be prepared by the buyer, the seller will in charge of connection with safety interface of wet parts), siren system only in the drying parts, exhausting system to guarantee the safety of cyclopentane foaming agent; in addition, in the position of feeding material, the inclining device can realize molding frame has an inclining angle with 70 degree that will suitable for operators handle here and also convenient for loading and unloading during the procedure of operation. II. Main technical performance parameter  Station number of the lines: 20  Molding board size (L×W) 2000×1000×180mm  Heating mode steam heating  Foaming material: Non-freon foaming  Tact time(depending on proficiency in operation): 40s  Solidifying time for foaming agent 360s---adjustable within 999s;  Air source pressure: 0.6Mpa  Electricity power supply: 380V\50Hz  Size(L×W×H): 30000×7000×4000mm-------reference only, final parameter will depending on the layout from your product's size demands KCM MACHINERY MANUFACTURING CO., LTD Mr. Leo Zhang Mobile Phone: +0086 15855019595 Email: [email protected]; [email protected]; [email protected]; Tel: 0086 550 3088037; Fax: 0086-550 3088029 SKYPE: leizhang112; QQ: 454656098; Http: www.e-kc.net Address: No. 688, ZIWEI South Road, CHUZHOU City, Anhui Province, China.
Views: 4163 LEI ZHANG
Refrigerator U Shell Side Panel Roller Forming Line for HAIER Project
 
04:16
Refrigerator U Shell Side Panel Roller Forming Line for HAIER Project Refrigerator Side Panel Roller Forming Line—U-shaping Cabinet Body: The Refrigerator Side Panel Roller Forming Line is composed by automatic loading machine, punching machine, 180° turning machine, roller forming machine; Z-L bending machine; U bending machine, pneumatic system, Hydraulic system, electricity control system and etc. 1、outer dimensions of the line: L×W×H = 35000×3000×1800mm 2、working height of the line: 900mm (above the floor) 3、dimensions of the applied sheets: length: 1400~4200mm width: 500~650mm thickness: 0.5~0.6mm 4、applied sheets: cold-rolled steel sheet or coated steel sheet or PCM sheet 5、dimensions of the finished products: U-shape shell: height: 500~1800mm width: 450~700mm depth: 450~600mm 6、time of production cycling: 30s KCM can provide special requirements of processes that Sheet Metal Forming Line can be designed and made in accordance with customers Needed Standard and Demands.
Views: 657 LEI ZHANG
KCM MC----Chest Freezer Metal Sheet for Cabinet Body Outer Shell Auto Forming Line
 
02:39
Leizhang112----Automatic Chest Freezer Outer Panel Forming Line Ⅰ. Summary This line mainly compose of automatic loading machine, punching machine 1, punching machine 2, length side bending , two end side bending machine , unload machine, pneumatic system, Hydraulic system, electricity control system and etc. This line has the following advantages such as reasonable structure, convenient for worker's operation and maintenance, harmonious manipulation interface between manipulator and machine and high productivity effect etc.。 Ⅱ. Performance Data of Technology 1. Production line Dimensions --Reference-: About L19000*W2600*H2400; 2. Height for work piece : from ground 900mm; 3. Stations: 7; 4. The work of the beat: 20 seconds / set; 5. Work piece materials used: Aluminum plate& Cool roll steel 0.5 mm 7. Dimension after Form: Length*Width--500~1500mm--*--500~850; 8. Electric supply : AC380V, 50HZ, the total power of about 30KW; 9. Gas source: 1 / 2 "---0.5-0.65Mpa; 10. Water supply: Industrial water.----25 liter/minute; KCM MACHINERY MANUFACTURING CO., LTD Mr. Leo Zhang Mobile Phone: +0086 15855019595 Email: [email protected]; [email protected]; [email protected]; Tel: 0086 550 3088037; Fax: 0086-550 3088029 SKYPE: leizhang112; QQ: 454656098; Http: www.e-kc.net Address: No. 688, ZIWEI South Road, CHUZHOU City, Anhui Province, China. Chest Freezer Sheet Punching, Chest Freezer Metal Punching, Chest Freezer Metal Processing, Chest Freezer Outer Shell Cutting and Piercing, Chest Freezer Front and Back Sheet Production, Chest Freezer Manufacturing, Chest Freezer Sheet Metal Working, Showcase Metal Work Processing, Showcase Metal Cabinet Manufacturing, Showcase Production Line, Chest Freezer Production Line
Views: 2197 LEI ZHANG
KCM Chest Freezer Prodcution Line-----Chest Freezer Outer Shell Metal Forming Line
 
05:08
[email protected] Freezer Outer Shell Metal Forming Line for U-bending Cabinet Body Automatic Chest Freezer Outer Panel Forming Line Ⅰ. Summary This line mainly compose of automatic loading machine, punching machine 1, punching machine 2, length side bending , two end side bending machine , unload machine, pneumatic system, Hydraulic system, electricity control system and etc. This line has the following advantages such as reasonable structure, convenient for worker's operation and maintenance, harmonious manipulation interface between manipulator and machine and high productivity effect etc.。 Ⅱ. Performance Data of Technology 1. Production line Dimensions --Reference: About L19000*W2600*H2400; 2. Height for work piece : from ground 900mm; 3. Stations: 7; 4. The work of the beat: 20 seconds / set; 5. Work piece materials used: Aluminum plate& Cool roll steel 0.5 mm 7. Dimension after Form: Length*Width--500~1500mm---*--500~850; 8. Electric supply : AC380V, 50HZ, the total power of about 30KW; 9. Gas source: 1 / 2 "---0.5-0.65Mpa; 10. Water supply: Industrial water.----25 liter/minute; KCM MACHINERY MANUFACTURING CO., LTD Mr. Leo Zhang Mobile Phone: +0086 15855019595 Email: [email protected]; [email protected]; [email protected]; Tel: 0086 550 3088037; Fax: 0086-550 3088029 SKYPE: leizhang112; QQ: 454656098; Http: www.e-kc.net Address: No. 688, ZIWEI South Road, CHUZHOU City, Anhui Province, China.
Views: 1867 LEI ZHANG
KCM Machine----Chest Freezer Metal Panel for Body U-shell Full Auto Forming Line
 
04:07
[email protected] ------ Chest Freezer Metal Panel for Body U-shell Full Auto Forming Line Automatic Chest Freezer Outer Panel Forming Line Ⅰ. Summary This line mainly compose of automatic loading machine, punching machine 1, punching machine 2, length side bending , two end side bending machine , unload machine, pneumatic system, Hydraulic system, electricity control system and etc. This line has the following advantages such as reasonable structure, convenient for worker's operation and maintenance, harmonious manipulation interface between manipulator and machine and high productivity effect etc.。 Ⅱ. Performance Data of Technology 1. Production line Dimensions --Reference-: About L19000*W2600*H2400; 2. Height for work piece : from ground 900mm; 3. Stations: 7; 4. The work of the beat: 20 seconds / set; 5. Work piece materials used: Aluminum plate& Cool roll steel 0.5 mm 7. Dimension after Form: Length*Width--500~1500mm--*--500~850; 8. Electric supply : AC380V, 50HZ, the total power of about 30KW; 9. Gas source: 1 / 2 "---0.5-0.65Mpa; 10. Water supply: Industrial water.----25 liter/minute; KCM MACHINERY MANUFACTURING CO., LTD Mr. Leo Zhang Mobile Phone: +0086 15855019595 Email: [email protected]; [email protected]; [email protected]; Tel: 0086 550 3088037; Fax: 0086-550 3088029 SKYPE: leizhang112; QQ: 454656098; Http: www.e-kc.net Address: No. 688, ZIWEI South Road, CHUZHOU City, Anhui Province, China. Automatic Chest Freezer Outer Panel Forming Line Ⅰ. Summary This line mainly compose of automatic loading machine, punching machine 1, punching machine 2, length side bending , two end side bending machine , unload machine, pneumatic system, Hydraulic system, electricity control system and etc. This line has the following advantages such as reasonable structure, convenient for worker's operation and maintenance, harmonious manipulation interface between manipulator and machine and high productivity effect etc.。 Ⅱ. Performance Data of Technology 1. Production line Dimensions --Reference-: About L19000*W2600*H2400; 2. Height for work piece : from ground 900mm; 3. Stations: 7; 4. The work of the beat: 20 seconds / set; 5. Work piece materials used: Aluminum plate& Cool roll steel 0.5 mm 7. Dimension after Form: Length*Width--500~1500mm--*--500~850; 8. Electric supply : AC380V, 50HZ, the total power of about 30KW; 9. Gas source: 1 / 2 "---0.5-0.65Mpa; 10. Water supply: Industrial water.----25 liter/minute;
Views: 802 LEI ZHANG
VISICOOLER SIDE WALL SHEET METAL FORMING LINE FROM KCM FOR VARIOLINE PARKISTAN
 
03:35
VISICOOLER SIDE PANEL ROLLER FORMING LINE FROM KCM This Sheet Metal Forming Line mainly compose of automatic loading machine,punching machine I,punching machine II,Two sides bending machine,End sides bending I,End sides bending II, Unloading, pneumatic system, Hydraulic system and electricity control system and etc. KCM for making this Sheet Metal Forming Line for especially to match mass Production of Visicooler Side Wall by Single Side Panel, that’s mean that one right Panel and Then another one for Left Panel for becoming one pair of Side Wall Produced by alternative Way in production. Working process: With this plant it is possible to produce Visicooler single side panel according to different size of Visi Cooler Side Wall drawings, and Processing briefly as following steps: . The sheet, previously cut to size and laid on the proper carriage, is loaded on the loading trolley by a pickup unit with suctions cups. Then, the laid sheet is on a comparable basis line, keeping as reference the front edge of the panels. The basis line is not adjustable when work the different dimensions of sheets to be processed. Its positioning is automatically carried out, according to the selected production program. When loaded, the sheet is picked up by suctions cups and carried onto the roller conveyor, after side positioning, the sheet is carried into the notching and piercing table. There is a approach switch at the entrance to the notching and piercing table ,when it sense the sheet, The transfer system start to run and carry the sheet to the place of punching position. the transfer system isn't working when sheet is Piercing At the end of the notching cycle, the transfer system is continuing its stroke transporting the sheet at the exit of the station. Then the panel is positioned and transported into two sides bending station. two sides bending machine Action Sequence: the panel is transported to front side positioning→side positioning→upper mould bar hold down → bending →restoration . At the end of two sides bending station, the side panel is transferred into End sides bending station. There are a front side positioning unit and a side positioning unit in this station. This device can be withdrawn when it sense the sheet, End sides vertical bending machine Action Sequence: front side positioning →side positioning→ hold down → bending →restoration the transfer system isn't working when sheet is bending; When the bending cycle has finished, the panel is unloaded by manual work from unloading. The all line is controlled by PLC and frequency convertor in which there are to modes for manual and automatic operation to meet the different type of product can be adjusted by manual mode. Further more this line also has the following advantages such as reasonable impact structure, convenient for worker’s operation and maintenance, harmonious manipulation interface between manipulator and machine and high KCM MACHINERY MANUFACTURING CO., LTD Mr. Leo Zhang Mobile Phone: +0086 15855019595 Email: [email protected]; [email protected]; [email protected]; Tel: 0086 550 3088037; Fax: 0086-550 3088029 SKYPE: leizhang112; QQ: 454656098; WECHAT-----LEIZHANG112, Http: www.e-kc.net http://www.e-kc.net/y1/ Address: No. 688, ZIWEI South Road, CHUZHOU City, Anhui Province, China.
Views: 573 LEI ZHANG
Refrigerator Single Side Panel Roller Forming Line From SUDAN LIEBHERR From KCM
 
02:55
Refrigerator Single Side Panel Roller Forming Line From SUDAN LIEBHERR From KCM 1--- Process Flow as following: Automatic loading→punching ( Alternative Production for Left& Right )→Rolling machine→End sides Sheet Folding Machine →Both End sides vertical bending machine→Unloading. 2--- Adjustable in Width and Length: Fully Automatic Length Adjustment to be realized by Servo Motor and it's Mechanical Device, but Width Adjustment will be executed by Manual way with Positioning Pin. Servo Motor from DELTA Taiwan. 3-- Other Issues: See attached Line Layout Drawing and It's Technical Documents for Description ( Signed by both Sides); 1. Production line Dimensions (Reference): About L26500*W3500*H4500; 2. Operation Height : 900mm Normally from Ground Level; 3. Working Stations: 6; 4. The work of the beat: 30 seconds / per sets; 5. Process Flow as follows: Automatic loading→punching→Rolling machine→End sides double sheets bending machine →End sides vertical bending machine→Unloading. 6. Sheet Material for Normal Production: Pre Coated Sheet ( PCM ) AND Steel Panel thickness: 0.45-0.55mm; 7. Adjustment scope for the product size: Single side panel (H* D)= ([1300~1850)x(500~650) 8. Electric supply : AC380V, 50HZ, the total power of about 45KW; 9. Compressed Air: 1 / 2 "(0.5-0.65Mpa); 10. Water supply: Industrial water.( 25 litres/minute)
Views: 663 LEI ZHANG
Last Video for Bottom Z Shape of Inner Tanks of Chest Freezer ALASKA
 
02:19
KCM Chest Freezer Inner Tank Sheet Metal Forming Line for ALASKA Factory in making chest Freezer fully automatically, this line including Sheet Loading, Punching and Cutting Station, Roller Forming for Side Profile, Cutting Off by Seperating into Two Pieces, Ending Side Profile FOrming, Clamping Device for PIcking UP Sheet , Z -Shape FORMING Station. [email protected], mobile: 0086 15855019595 KCM Machinery Manufacturing Co., Ltd
Views: 411 LEI ZHANG
Full Automatic Running of Hidden Cap Door Forming Line From KCM
 
03:00
KCM Sheet Metal Forming Line for Hidden Cap Style of Refrigerator Door Panel 1--- Sheet Metal Forming Line Composed: Loading Station, Punching Station, Sheet Moving and Transmission by Clamping Device, Some Extra Punching for Displayer and Water Dispenser, Bending Two Longer Both Sides, Sometimes Different Other Profile Bending, Mechanical Arm for Transmission to End Sides Bending, Press Station for Both End Sides Bending, Final Position for Displayer and Water Dispenser Forming, Finished Door Shell Releasing. 2--- Advantages of Door Forming Line: Fast Efficiency for Production Rate, Mold Changing Easily, Different Profile can be done by fast way, Smaller Space in compare with many Metal Dies by Press Hydraulic Brake. 3---- Other Technical Parameters: 1. Production line Dimensions (Reference): About L33000*W3500*H2300; 2. Operation Height: 900mm From Ground Level; 3. Stations: 12; 4. Circle Time of Production: 25 seconds / set; 6. Metal Sheet Requirement: Cold roll or PCM with film Panel thickness: 0.45-0.55mm; 7. Dimension of Formed Product: Length*Width(600~1900mm)*(500~950mm); 8. Electric supply : AC380V, 50HZ, the total power of about 45KW; 9. Compressed Air Supplier: 1 / 2 "(0.5-0.65Mpa); 10. Water supply: Industrial water.( 25 liters/minute)
Views: 180 LEI ZHANG
Five Stations Thermo Forming Maching--- KCM MACHINE---Leizhang112@126.com
 
00:41
Four Station Vacuum Forming Machine: This linear multi-stations vacuum forming machine is mainly consist of feeding part for the purpose of loading material sheet、pre-heating and heating station with ceramic heaters and cooling system、vacuum forming machine、transmitting sheet by spiked chain、hydraulic system 、pneumatic system、vacuum system、water circulation system、electrical control system and so on . The processing flow as follows: Manually put the packed sheet onto loading station and positioning on the stacking table — Automatically feeding ABS &HIPS sheet by suction pad —centering alignment—spiked chain press sheet and keep moving forward to pre-heating location—After pre-heating, the softened sheet continue to Heating station — the fully heated sheet with reasonable swaging — vacuum forming position-middle pressing frame come down for keeping sheet tightly with window plate—bubble blowing—forming mould up to position-upper framework come down for auxiliary forming if necessary such as complicated structure in corner for door and cabinet inner liner—vacuuming so that heated sheet can be absorbed onto the vacuum forming mold's surface —upper framework go back to top position for waiting next circle— Cooling fan blow the wind for fast cooling inner liner after forming—de-molding—Forming mold descending— middle pressing frame upward back to original position for awaiting next circle — The finished inner liner move to unloading table by spiked Chain Transmitting Conveyor — Picking up Table raising for coming down liner and then cylinder action as a slope to inclining finished liner to be sliding out. 关键词: Refrigerator Factory;Refrigerator Plant;Refrigerator Production Line;Straight Line Thermo Forming Machine;Refrigerator Factory;Linear Vacuum Forming Machine;Five Stations Thermo Forming Machine;Refrigerator Plant;Four Station Vacuum Forming Machine;Door Liner HIPS Vacuum Forming Machine;Door Liner Thermo Forming Mold;Cabinet Liner Forming Machine;Refrigerator Production Line;Fridge Liner Vacuum Forming Machine;Straight Line Thermo Forming Machine;Refrigerator Making Machine;Refrigerator Thermo Forming Machine;Refrigerator Machine;Refrigerator Factor KCM MACHINERY MANUFACTURING CO., LTD Mr. Leo Zhang Mobile Phone: +0086 15855019595 Email: [email protected]; [email protected]; [email protected]; Tel: 0086 550 3088037; Fax: 0086-550 3088029 SKYPE: leizhang112; QQ: 454656098; Http: www.e-kc.net Address: No. 688, ZIWEI South Road, CHUZHOU City, Anhui Province, China.
Views: 771 LEI ZHANG
SUDAN LIEBHERR REFRIGERATOR SIDE PANEL ROLLER FORMING LINE
 
01:47
Refrigerator Single Side Panel Roller Forming line for Germany LIEBEHRR Refrigerator R&L Structure, the Machine composed by Two Stacks Sheet Loading, Punching and Piercing station, Roller Forming station, End Side Bending-1, End Sides Bending--II, Automatical Sero-System Adjustment in Length and Width,
Views: 189 LEI ZHANG
Four Station Vacuum Forming Machine---Spiked Chain For Sheet Transmission System
 
00:27
Four Station Vacuum Forming Machine: This linear multi-stations vacuum forming machine is mainly consist of feeding part for the purpose of loading material sheet、pre-heating and heating station with ceramic heaters and cooling system、vacuum forming machine、transmitting sheet by spiked chain、hydraulic system 、pneumatic system、vacuum system、water circulation system、electrical control system and so on . The processing flow as follows: Manually put the packed sheet onto loading station and positioning on the stacking table — Automatically feeding ABS &HIPS sheet by suction pad —centering alignment—spiked chain press sheet and keep moving forward to pre-heating location—After pre-heating, the softened sheet continue to Heating station — the fully heated sheet with reasonable swaging — vacuum forming position-middle pressing frame come down for keeping sheet tightly with window plate—bubble blowing—forming mould up to position-upper framework come down for auxiliary forming if necessary such as complicated structure in corner for door and cabinet inner liner—vacuuming so that heated sheet can be absorbed onto the vacuum forming mold's surface —upper framework go back to top position for waiting next circle— Cooling fan blow the wind for fast cooling inner liner after forming—de-molding—Forming mold descending— middle pressing frame upward back to original position for awaiting next circle — The finished inner liner move to unloading table by spiked Chain Transmitting Conveyor — Picking up Table raising for coming down liner and then cylinder action as a slope to inclining finished liner to be sliding out. Mr. Leo Zhang Mobile Phone: +0086 15855019595 Email: [email protected]; [email protected]; [email protected]; Tel: 0086 550 3088037; Fax: 0086-550 3088029 SKYPE: leizhang112; QQ: 454656098; Http: www.e-kc.net Address: No. 688, ZIWEI South Road, CHUZHOU City, Anhui Province, China.
Views: 380 LEI ZHANG
Movement Of CN57 Vacuum Forming Mold of LIEBHERR Fridge Model From KCM Machinery and Mold Maker
 
00:22
Refrigerator Inner Liner Vacuum Forming Mold: Refrigerator Cabinet Foaming Plug: KCM has provided successfully to LIEBHERR for several orders in K42, KB42, GNP31, IK2314, IK2310 etc different models. With severe standard requirement and fastest delivery time, KCM tried their best to show the satisfied answer to LIEBHERR’s demand. Currently KCM has built stable and long term cooperation relationship with LIEBHERR GROUP. Meanwhile KCM also supplied similar Foaming mold, Vacuum Forming Mold to SHARP, SANYO, SIEMENSE, TOSHIBA etc international famous huge companies. KCM Supplied LIEBHERR Vcuum Forming Mold that strictly to be meet the following Principles: 1--- Outer Sourcing Parts: Pneumatic Parts will be FESTO, Guiding Bearing will be BOSCH, Linear Guiding Rail should be HIWIN, Bearing Bushes by IGUS, HELICOIL by Boellhoff or Kerb Konus etc.... 2--- Designing Conception: All the 3-D Drawing will be approved by LIEBHERR Engineers and start for final production; 3--- Fitting Machine by LHG Plant: There are two ways that one way is CAROUSEL Moving Carts that Foaming Plug will be Assembled Together with LHG Fixture and then moving on the Cart during the Curing Time, another way is Fixed Fixture by a Round Layout that similar with Straight Fixture Cabinet Foaming Line; 4---- Mold Material: Mold Body is Aluminum Casting, and Some Movement by Sliding Part is Aluminum Plate, Smaller Sliding Parts is Brass, and Pipe of Water is Copper. 5---- Processing and Quality Control: Machining is necessary by CNC Processing way, especially for the Movement Device to be severely controlled precision, and Surfac
Views: 263 LEI ZHANG
ALASKA U Shell Roller Forming Line of Chest Freezer
 
02:59
KCM Making U-Shell CHEST FREEZER OUTER BODY for ALASKA factory in the year 2015, and full line concluding Sheet Loading, Puncihng and Cutting, Roller Forming, Compressor Compartment Step FOrming, Ventination Window Forming,End Side Vertical Forming, U-Shell Forming and Releasing manually KCM MACHINERY MANUFACTURING CO., LTD Mr. Leo Zhang Mobile Phone: +0086 15855019595 Email: [email protected]; [email protected]; [email protected]; Tel: 0086 550 3088037; Fax: 0086-550 3088029 SKYPE: leizhang112; QQ: 454656098; Http: www.e-kc.net Address: No. 688, ZIWEI South Road, CHUZHOU City, Anhui Province, China. http://www.e-kc.net/en/index.asp KCM MACHINERY MANUFACTURING CO., LTD Mr. Leo Zhang Mobile Phone: +0086 15855019595 Email: [email protected]; [email protected]; [email protected]; Tel: 0086 550 3088037; Fax: 0086-550 3088029 SKYPE: leizhang112; QQ: 454656098; WECHAT-----LEIZHANG112, Http: www.e-kc.net http://www.e-kc.net/en/index.asp Address: No. 688, ZIWEI South Road, CHUZHOU City, Anhui Province, China.
Views: 113 LEI ZHANG
KCM Machine---Chest Freezet Aluminum Sheet Inner Tank Reviting for Joint Together
 
00:20
Lei Zhang112-----Chest Freezet Aluminum Sheet Inner Tank Reviting for Joint Together For fast efficiency in working to joint together amont different Chest Freezer Inner Tank Sheets, KCM provide this very fast machine to put all sides Inner Tank's Sheet to be joint together by very high prodution rate. Ar present many factories used our machinen for this step in less cost but high working time. KCM MACHINERY MANUFACTURING CO., LTD Mr. Leo Zhang Mobile Phone: +0086 15855019595 Email: [email protected]; [email protected]; [email protected]; Tel: 0086 550 3088037; Fax: 0086-550 3088029 SKYPE: leizhang112; QQ: 454656098; Http: www.e-kc.net Address: No. 688, ZIWEI South Road, CHUZHOU City, Anhui Province, China.
Views: 356 LEI ZHANG
Movement Of CN57 PU Foaming Plug of LIEBHERR New Model From KCM Machinery and Mold Maker
 
00:23
KCM Supplied LIEBHERR Foaming Plug that strictly to be meet the following items: 1--- Outer Sourcing Parts: Pneumatic Parts will be FESTO, Guiding Bearing will be BOSCH, Linear Guiding Rail should be HIWIN, Bearing Bushes by IGUS, HELICOIL by Boellhoff or Kerb Konus etc.... 2--- Designing Conception: All the 3-D Drawing will be approved by LIEBHERR Engineers and start for final production; 3--- Fitting Machine by LHG Plant: There are two ways that one way is CAROUSEL Moving Carts that Foaming Plug will be Assembled Together with LHG Fixture and then moving on the Cart during the Curing Time, another way is Fixed Fixture by a Round Layout that similar with Straight Fixture Cabinet Foaming Line; 4---- Mold Material: Mold Body is Aluminum Casting, and Some Movement by Sliding Part is Aluminum Plate, Smaller Sliding Parts is Brass, and Pipe of Water is Copper. 5---- Processing and Quality Control: Machining is necessary by CNC Processing way, especially for the Movement Device to be severely controlled precision, and Surface quality finally polished like mirror and painting for avoiding any blacken color in the Inner Liner;
Views: 332 LEI ZHANG
Refrigerator Cabinet Foaming Plug With Zero to Zero Precision for LIEBHERR
 
00:11
Refrigerator Inner Liner Vacuum Forming Mold: Refrigerator Cabinet Foaming Plug: KCM has provided successfully to LIEBHERR for several orders in K42, KB42, GNP31, IK2314, IK2310 etc different models. With severe standard requirement and fastest delivery time, KCM tried their best to show the satisfied answer to LIEBHERR's demand. Currently KCM has built stable and long term cooperation relationship with LIEBHERR GROUP. Meanwhile KCM also supplied similar Foaming mold, Vacuum Forming Mold to SHARP, SANYO, SIEMENSE, TOSHIBA etc international famous huge companies. Contact Person: Mr. Leo Zhang Mobile Phone: +0086 15855019595 Email: [email protected]; [email protected]; [email protected]; Tel: 0086 550 3088037; Fax: 0086-550 3088029 SKYPE: leizhang112; QQ: 454656098; Http: www.e-kc.net Address: No. 688, ZIWEI South Road, CHUZHOU City, Anhui Province, China.
Views: 1068 LEI ZHANG
KCM Machine--- Freezet   Inner Tank Reviting Machine for Joint Together
 
00:18
Lei Zhang112-----Chest Freezet Aluminum Sheet Inner Tank Reviting for Joint Together For fast efficiency in working to joint together amont different Chest Freezer Inner Tank Sheets, KCM provide this very fast machine to put all sides Inner Tank's Sheet to be joint together by very high prodution rate. Ar present many factories used our machinen for this step in less cost but high working time. KCM MACHINERY MANUFACTURING CO., LTD Mr. Leo Zhang Mobile Phone: +0086 15855019595 Email: [email protected]; [email protected]; [email protected]; Tel: 0086 550 3088037; Fax: 0086-550 3088029 SKYPE: leizhang112; QQ: 454656098; Http: www.e-kc.net Address: No. 688, ZIWEI South Road, CHUZHOU City, Anhui Province, China.
Views: 207 LEI ZHANG
KCM Door Forming Line by Hidden Door Cap Style Refrigerator Sheet Metal Forming Line
 
03:06
KCM Sheet Metal Forming Line for Hidden Cap Style of Refrigerator Door Panel 1--- Sheet Metal Forming Line Composed: Loading Station, Punching Station, Sheet Moving and Transmission by Clamping Device, Some Extra Punching for Displayer and Water Dispenser, Bending Two Longer Both Sides, Sometimes Different Other Profile Bending, Mechanical Arm for Transmission to End Sides Bending, Press Station for Both End Sides Bending, Final Position for Displayer and Water Dispenser Forming, Finished Door Shell Releasing. 2--- Advantages of Door Forming Line: Fast Efficiency for Production Rate, Mold Changing Easily, Different Profile can be done by fast way, Smaller Space in compare with many Metal Dies by Press Hydraulic Brake. 3---- Other Technical Parameters: 1. Production line Dimensions (Reference): About L33000*W3500*H2300; 2. Operation Height: 900mm From Ground Level; 3. Stations: 12; 4. Circle Time of Production: 25 seconds / set; 6. Metal Sheet Requirement: Cold roll or PCM with film Panel thickness: 0.45-0.55mm; 7. Dimension of Formed Product: Length*Width(600~1900mm)*(500~950mm); 8. Electric supply : AC380V, 50HZ, the total power of about 45KW; 9. Compressed Air Supplier: 1 / 2 "(0.5-0.65Mpa); 10. Water supply: Industrial water.( 25 liters/minute)
Views: 228 LEI ZHANG
Flow
 
00:16
Views: 8 LEI ZHANG
Movement Video for CBN57 Foaming Plug of Germany LIEBHERR Refrigerator Factory
 
00:20
KCM Supplied LIEBHERR Foaming Plug that strictly to be meet the following items: 1--- Outer Sourcing Parts: Pneumatic Parts will be FESTO, Guiding Bearing will be BOSCH, Linear Guiding Rail should be HIWIN, Bearing Bushes by IGUS, HELICOIL by Boellhoff or Kerb Konus etc.... 2--- Designing Conception: All the 3-D Drawing will be approved by LIEBHERR Engineers and start for final production; 3--- Fitting Machine by LHG Plant: There are two ways that one way is CAROUSEL Moving Carts that Foaming Plug will be Assembled Together with LHG Fixture and then moving on the Cart during the Curing Time, another way is Fixed Fixture by a Round Layout that similar with Straight Fixture Cabinet Foaming Line; 4---- Mold Material: Mold Body is Aluminum Casting, and Some Movement by Sliding Part is Aluminum Plate, Smaller Sliding Parts is Brass, and Pipe of Water is Copper. 5---- Processing and Quality Control: Machining is necessary by CNC Processing way, especially for the Movement Device to be severely controlled precision, and Surface quality finally polished like mirror and painting for avoiding any blacken color in the Inner Liner;
Views: 196 LEI ZHANG

Lamictal 100mg bid
Coreg er 20 mg
5mg Cialis prices
Glucophage xr 500mg and pregnancy
Paroxetine 20 mg weight gain